23dBm GSM 900mhz DIP Single band Cellular Signal Booster
23dBm GSM 900mhz DIP Single band Cellular Signal Booster
Features:
1. Elegant and Compact design
2. Built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals.
3. 31dB MGC(Manual gain control) 1dB one step available for both uplink and downlink to adjust the gain value for proper coverage during installation or maintenance.
4. Auto shut off function available for both uplink and downlink to avoid deep self-oscillations from jamming the towers, saving your trouble from operators.
5. Low power consumption - 6W
Benefits
Improve network quality, availability, and capacity
Expand coverage area
Increase data throughput
Improve user experience
Standard Package:
1) Power supply adapter 1 unit
2) AC power plug (USA/EU/Swiss/UK/SA/China standard etc) 1unit
3) Installation kit 1unit
4) User manual 1unit
Recommended Accessories:
1)Donor(outdoor) antenna:Patch Antenna(8.5dBi 806-960/1710-2700MHz)
2)Service(indoor) antenna: Omni Ceiling Antenna (3dBi,806-960/1710-2700MHz)
3)2*10m of 50Ω-5 coaxial cable with 2 connecters.Or 2*15m of 50Ω-5 coaxial cable with 2 connecters
| Electrical specification | Uplink | Downlink | |
| GSM900 | 890 ~ 915 MHz | 935 ~ 960 MHz | |
| Max .Gain | 23 | ≥ 70dB | ≥75dB |
| Max .Output Power | 23 | ≥ 17dBm | ≥ 23dBm |
| Band width (-3dB) | Wide Band | ||
| MGC (Step Attenuation ) | ≥ 31dB @ 1dB step | ||
| Automatic Level Control | ≥ 15dB,auto shut off after 15dB | ||
| Gain Flatness | GSM & CDMA | Tpy≤ 6dB(P-P); DCS,PCS≤ 8dB(P-P) | |
| WCDMA | ≤ 2dB/ 3.84MHz,Full Band≤ 5dB(P-P) | ||
| Noise Figure | ≤ 6dB | ||
| VSWR | ≤ 2.0 | ||
| Group Delay | ≤ 1.5μs | ||
| Frequency stability | ≤ 0.01ppm | ||
| Spurious Emission & Output inter-modulation | GSM Meet ETSI TS 151 026 V6.1.0 | ||
| WCDMA Meet 3GPP TS 25.143 ( V 6.2.0 ) | |||
| CDMA Meet IS95 & CDMA2000 | |||
| WCDMA System | Spurious Emission Mask | Meet 3GPP TS 25.143 ( V 6.2.0 ) | |
| Modulation Accuracy | ≤ 12.5% | ||
| Peak Code Domain Error | ≤ -35dB@Spreading Factor 256 | ||
| CDMA System | Rho | ρ > 0.980 | |
| ACPR | Meet IS95 & CDMA2000 | ||
| LED Alarm | Standard | ||
| Power LED | Power Indicator | ||
| ALC LED | Orange @ ALC 1~5dB, Red @ ALC 15dB~20dB, | ||
| LED off after 5 seconds red color | |||
| Mechanical Specifications | Standard | ||
| I /O Port | N-Female | ||
| Impedance | 50 ohm | ||
| Operating Temperature | -25ºC~+55ºC | ||
| Environment Conditions | IP40 | ||
| Dimensions | 250*125*52mm | ||
| Weight | ≤ 2.5Kg | ||
| Power Supply | Input AC90~264V,output DC12V / 3A | ||
